|
Technical Parameter:
Model | KMnO4 Activated Alumina | |
Appearance | Purple, Sphere | |
Type | KA407 | |
Size | 3-5MM | |
Bulk Density | kg/m3 | 800(±5%) |
Surface Area | m2/g | 300-330 |
Pore Volume | ml/g | 0.4-0.5 |
Crushed Resistance | KG | 2 |
Moisture content (approx.) | wt% | 25 |
Removal capacity for H2S of own weight* | wt% | 7 |
Removal capacity for NO2 of own weight* | wt% | 10 |
Typical air velocity | m/s | 0.3-2.5 |
Temperature range | °C | –20 – +51 |
Suitable for relative air humidities | % | 10 – 95 |
Other potassium perman- ganate content available | % | 4/6/10/12/14 |
Other Type of Activated Alumina
Activated Alumina KA100 for TBC removal in production of polyethylene and polymer
Activated Alumina KA401 for ordinary gas and fluid dehydration
Activated Alumina KA402 for arsenic and fluoride removal in water treatment
Activated Alumina KA403 for absorption in producing hydrogen peroxide (H2O2)
Activated Alumina KA404 for catalyst carrier
Activated Alumina KA405 for dehydrating and drying in air separation
PRODUCT BENEFITS
Uniform ball size
High crush strength
Low abrasion
High absorptive capacity
STORAGE INSTRUCTIONS
CHEMXIN adsorbents are shipped in air-tight, non returnable drums or bags. See our Standard Offer for Packing, Marking and Expedition for details. In all cases we recommend to warehouse the pallets indoor in order to prevent them from bad weather conditions (rain, sand storm, etc.), direct sun and ground humidity. Outside storage is not recommended, in particular for bags.
The drums can be stored up to 5 years under cover. Bags cannot be stored for more than 2 years, even under cover. For longer storage durations, we recommend to sample and analyse the products, in order to make sure they are still fit for use. These recommendations are general and may slightly differ depending on the product type, packaging, storage location, etc. In any case, ask CHEMXIN to make sure your storage conditions meet our requirements.
STANDARD PACKAGES
25KG Paper Bag
Inside package: sealed PP bag