+86 13538980736 Ms. Helen zeng 
Current Location
Activated Alumina for Chloride Removal
|
CHEMXIN Activated alumina Chloride removal with high-performance dechlorination agent has the characteristics of wide temperature range, high and low temperature activity uniformity, good water resistance, active components and chlorine after the reaction is not easy to migrate, can be used for synthesis of dehydrochlorination and protection of catalysts and adsorbents.Also it can be widely used in naphtha, natural gas, H2, N2, NH3, CO, CO2 and other raw materials were dechlorination.
In the petrochemical production process, the chlorine in the feed gas can cause a variety of catalyst and adsorbent poisoning, so that the adsorbent and catalytic performance failure. Also the presence of chlorine will seriously corrode the device and equipment, affecting the normal operation of production, so it must be removed the Chloride. Usually we would like to use solid dechlorination agent Activated Alumina to remove the chloride in the feed gas.
PRODUCT PARAMETER
Model | Activated Alumina-Antichlor | |
Appearance | White, Sphere | |
Size | 3-5mm | |
Chemical Composition | Al2O3 % + Auxiliaries | ≥93 |
Bulk Density | g/ml | 0.75-0.80 |
Surface Area | m2/g | ≥130 |
Breakthrough Chlorine Content | 50℃ | ≥12% |
Breakthrough Chlorine Content | 350℃ | ≥22% |
Crushing Strength | N/Piece | ≥120 |
Operating Temperature | ℃ | 5-400 |
Working Pressure | Mpa | Ordinary pressure-0.8 |
Air Speed | 1000-3000h-1 | |
Bed Aspect Ratio | >3 | |
Chlorine Release Rate | % | ≥99.9 |
Send your inquiry
