Blue Silica Gel Desiccant
You are here: Home » Products » Silica Gel » Blue Silica Gel Desiccant
High Quality Desiccant Blue Silica Gel used for absorbing moisture anti-rusting of instruments High Quality Desiccant Blue Silica Gel used for absorbing moisture anti-rusting of instruments
Blue Silica Gel Desiccant Blue Silica Gel Desiccant
Blue Silica Gel Desiccant Blue Silica Gel Desiccant
Blue Silica Gel Desiccant Blue Silica Gel Desiccant
Blue Silica Gel Desiccant Blue Silica Gel Desiccant

loading

Blue Silica Gel Desiccant

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Availability:
Quantity:

High Quality Desiccant Blue Silica Gel used for absorbing moisture anti-rusting of instruments

Product Description

    High Quality Desiccant Blue Silica Gel used for absorbing moisture anti-rusting of instruments  


Color: faint yellow.Chemical molecular formula:mSiO2.nAl2O3.XH2O.

Chemically stable,flame-resisting.Insoluble in any solvent except strong alkali or hydroelectric acid. In comparison with fine-pored silica gel ,the adsorption capacity of HY-H silica alumina gel is quite the same when used at low relative humidity ,(e.g.RH=10%,RH=20%),while its adsorption capacity at high humidity is 6—10%higher than that of fine-ported silica gel. Its thermal stability is over 150 higher than that of fine-pored silica gel (200 ).Ideally suited for use as absorbent and variable-temperature absorbent.

Application

Mainly used of separating light hydrocarbon from natural gas, the product can reduce dew point of hydrocarbon to produce natural gas gasoline , drying natural gas at the same time .Add 20% (wt) HY-W as the protective layer if water drip exits in separation system. In addition,it can be used as common dryer ,catalyst and its carrier ,variable –pressure adsorption separation agent (PSA). As variable-temperature adsorption separation agent (TSA) at higher temperature, it performs especially suitable.


Technical Parameter:

Appearance transparent or translucent glass-like pellet or lump
Application Mainly used for drying water-proof,can also be used as catalyst carriers, adsorbents, separators and variable-pressure adsorbents, etc.
ITEM
Typical values
Adsorption capacity RH=20%,% 11.2
RH=50%,% 29.2
RH=90%,% 37.6
Loss on heating,%       1
thermal conductivity KJ/m.hr.°c 0.63
average pore diameter nm 2.0-3.0
pore volume ml/g 0.35-0.45
Specific surface area m²/g 650-800
specific heat KJ/kg.°c 0.92
PH value 4
Specific resistance,Ω .cm 5630
Silica %   98.5
ratio of qualified spherical granules,% 90
Bulk density, g/L 784
Sizes:0.5-1.5mm, 0.5-1mm, 2-4mm, 2-5mm, 4-8mm
[Packaging] 15kg per compound bag or 300 kg. Per container bag.
[Note] The moisture content, packing and size may be customized per specific requirements.
Packaging & Shipping

High Quality Desiccant Blue Silica Gel used for absorbing moisture anti-rusting of instruments   

Previous: 
Next: 

Product Category

Contact Us

Add : 4F, Changshanghui Building, No.31 Shengxing Street, Panyu District, Guangzhou city, Guangdong province, 511400 China
Tel : +86-20-39185057
Hand phone:+86-13538980736
E-mail : info@chemxin.com
Skype : xintao08

CHEMXIN

Adsorbent Specialist for 20 Years
Best Adsorption Solution for You Only

PRODUCTS

CONTACT US

  Address:4F, Changshanghui Building, No. 31 Shengxing Street, Panyu District, Guangzhou City, Guangdong Province, 511400 China
  Tel:+86-20-39185057
  Phone: +86-13538980736
  E-mail:info@chemxin.com
Copyright 2022 Guangzhou Chemxin Environmental Material Co.,Ltd. Support by Leadong. Sitemap